The peak stress method (PSM) is an engineering, finite element (FE)]oriented method to rapidly estimate the notch stress intensity factors by using the singular linear elastic peak stresses calculated from coarse FE analyses. The average element size adopted to generate the mesh pattern can be chosen arbitrarily within a given range. Originally, the PSM has been calibrated under pure mode I and pure mode II loadings by means of Ansys FE software. In the present contribution, a round robin between 10 Italian universities has been carried out to calibrate the PSM with 7 different commercial FE codes. To this aim, several twodimensional mode I and mode II problems have been analysed independently by the participants. The obtained results have been used to calibrate the PSM for given stress analysis conditions in (i) FE software, (ii) element type and element formulation, (iii) mesh pattern, and (iv) criteria for stress extrapolation and principal stress analysis at FE nodes.

Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh patterns

Avalle, M.;Rebora, A.;
2017

Abstract

The peak stress method (PSM) is an engineering, finite element (FE)]oriented method to rapidly estimate the notch stress intensity factors by using the singular linear elastic peak stresses calculated from coarse FE analyses. The average element size adopted to generate the mesh pattern can be chosen arbitrarily within a given range. Originally, the PSM has been calibrated under pure mode I and pure mode II loadings by means of Ansys FE software. In the present contribution, a round robin between 10 Italian universities has been carried out to calibrate the PSM with 7 different commercial FE codes. To this aim, several twodimensional mode I and mode II problems have been analysed independently by the participants. The obtained results have been used to calibrate the PSM for given stress analysis conditions in (i) FE software, (ii) element type and element formulation, (iii) mesh pattern, and (iv) criteria for stress extrapolation and principal stress analysis at FE nodes.
File in questo prodotto:
File Dimensione Formato  
FFE12751_proof.pdf

accesso aperto

Descrizione: Proof
Tipologia: Documento in Pre-print
Dimensione 3.23 MB
Formato Adobe PDF
3.23 MB Adobe PDF Visualizza/Apri
Meneghetti_et_al-2017-Fatigue_&_Fracture_of_Engineering_Materials_&_Structures.pdf

accesso chiuso

Descrizione: Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh patterns
Tipologia: Documento in versione editoriale
Dimensione 2.97 MB
Formato Adobe PDF
2.97 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/11567/896352
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 38
  • ???jsp.display-item.citation.isi??? 36
social impact