Preparation of active washcoats of Ni/MgAl2O4 steam-reforming catalysts on FeCrAlloy foams is reported in this work. The MgAl2O4 powdered support was prepared via co-precipitation method, and Ni/MgAl2O4 was obtained via dry impregnation of 10% (w/w) of Ni. After full characterization of the powders, the deposition of the catalyst over the foams was performed by percolation followed by air-blowing (percolation-blowing). The resulting washcoat layers were quite homogeneous, uniform, and well adherent to the metallic support. Prototype catalytic foam samples, tested at the lab-scale, were found to be active in the steam reforming process.

Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction

FINOCCHIO, ELISABETTA;
2012-01-01

Abstract

Preparation of active washcoats of Ni/MgAl2O4 steam-reforming catalysts on FeCrAlloy foams is reported in this work. The MgAl2O4 powdered support was prepared via co-precipitation method, and Ni/MgAl2O4 was obtained via dry impregnation of 10% (w/w) of Ni. After full characterization of the powders, the deposition of the catalyst over the foams was performed by percolation followed by air-blowing (percolation-blowing). The resulting washcoat layers were quite homogeneous, uniform, and well adherent to the metallic support. Prototype catalytic foam samples, tested at the lab-scale, were found to be active in the steam reforming process.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/762789
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 39
  • ???jsp.display-item.citation.isi??? 37
social impact