La1-xSrxCo1-yFeyO3-δ (LSCF) fibers are synthesized through the the single-needle electrospinning method. The formation of nanofibers is a function of the operating parameters, i.e., rotational speed of the support, solution feeding rate, and operating voltage, which are investigated experimentally in this work. The results show that a rotational speed of 750 rpm, a solution feeding rate of 0.5 mL h-1, and an operating voltage of 17 kV allow to obtain tissues with an average fiber diameter of 0.590 μm and porosity around 50%. The subsequent calcination processes are investigated through thermogravimetric analysis (TGA), which shows exothermic peaks due to solvent evaporation, debinding and perovskite structure formation, and suggest to perform calcination slowly in the temperature range 520-820 K. A fiber calcination process is carried out with a heating rate of 0.3 K min-1. Calcined fibers appear unbroken and visibly shrunk (post-calcination average diameter 0.31 μm), with a porosity of the calcined tissue of 51%. The morphological chacteristics of the LSCF calcined tissues are very promising for application in intermediate temperature solid oxide fuel cell (IT-SOFC) electrodes.

Parameter Optimization for the Electrospinning of La1-xSrxCo1-yFeyO3-δ Fibers for IT-SOFC Electrodes

ENRICO, ANNA;ALIAKBARIAN, BAHAR;LAGAZZO, ALBERTO;BOTTER, RODOLFO;PEREGO, PATRIZIA;COSTAMAGNA, PAOLA
2017-01-01

Abstract

La1-xSrxCo1-yFeyO3-δ (LSCF) fibers are synthesized through the the single-needle electrospinning method. The formation of nanofibers is a function of the operating parameters, i.e., rotational speed of the support, solution feeding rate, and operating voltage, which are investigated experimentally in this work. The results show that a rotational speed of 750 rpm, a solution feeding rate of 0.5 mL h-1, and an operating voltage of 17 kV allow to obtain tissues with an average fiber diameter of 0.590 μm and porosity around 50%. The subsequent calcination processes are investigated through thermogravimetric analysis (TGA), which shows exothermic peaks due to solvent evaporation, debinding and perovskite structure formation, and suggest to perform calcination slowly in the temperature range 520-820 K. A fiber calcination process is carried out with a heating rate of 0.3 K min-1. Calcined fibers appear unbroken and visibly shrunk (post-calcination average diameter 0.31 μm), with a porosity of the calcined tissue of 51%. The morphological chacteristics of the LSCF calcined tissues are very promising for application in intermediate temperature solid oxide fuel cell (IT-SOFC) electrodes.
File in questo prodotto:
File Dimensione Formato  
Enrico_et_al-2017-Fuel_Cells.pdf

accesso chiuso

Tipologia: Documento in versione editoriale
Dimensione 1.43 MB
Formato Adobe PDF
1.43 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/862560
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 16
  • ???jsp.display-item.citation.isi??? 12
social impact