Natural convection heat transfer in vertical ribbed channels, using water as working fluid, has been experimentally studied. The investigation encompassed a large range of the channel aspect ratio, defined as the ratio between channel spacing and channel height, while the wall-to-fluid temperature difference was kept fixed. The measurement of local heat transfer coefficient was facilitated by a non-intrusive diagnostic tool, the schlieren technique, whose use for the quantitative study of liquid flows is rarely documented in the literature. Results provided an insight into the nature of free convection heat transfer from ribbed channels, whose geometry is significant in such several engineering devices as electronic equipment. It was found that a general reduction of heat transfer performance, relative to that of a flat vertical surface or a smooth vertical channel, was induced by the presence of ribs, within the range of the parameters investigated. Local and heat transfer characteristics were sensitive to changes in interplate spacing for small channel aspect ratios. Experimental data, recast in dimensionless form, were in excellent agreement with those obtained by this author in a previous research performed for aircooled channels, using the same experimental technique, the same geometric parameters of the ribbed surface, and a similar Rayleigh number.
Experiments on natural convection in water-cooled ribbed channels with different aspect ratios
TANDA, GIOVANNI
2017-01-01
Abstract
Natural convection heat transfer in vertical ribbed channels, using water as working fluid, has been experimentally studied. The investigation encompassed a large range of the channel aspect ratio, defined as the ratio between channel spacing and channel height, while the wall-to-fluid temperature difference was kept fixed. The measurement of local heat transfer coefficient was facilitated by a non-intrusive diagnostic tool, the schlieren technique, whose use for the quantitative study of liquid flows is rarely documented in the literature. Results provided an insight into the nature of free convection heat transfer from ribbed channels, whose geometry is significant in such several engineering devices as electronic equipment. It was found that a general reduction of heat transfer performance, relative to that of a flat vertical surface or a smooth vertical channel, was induced by the presence of ribs, within the range of the parameters investigated. Local and heat transfer characteristics were sensitive to changes in interplate spacing for small channel aspect ratios. Experimental data, recast in dimensionless form, were in excellent agreement with those obtained by this author in a previous research performed for aircooled channels, using the same experimental technique, the same geometric parameters of the ribbed surface, and a similar Rayleigh number.File | Dimensione | Formato | |
---|---|---|---|
2017IJHMT.pdf
accesso chiuso
Tipologia:
Documento in versione editoriale
Dimensione
1.25 MB
Formato
Adobe PDF
|
1.25 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.