Abstract: A coupled electric, dynamic, and thermodynamic analysis, developed by the authors for free-piston Stirling engine/linear alternator systems and reported in the first part of this study, is applied here to an existing and operating plant in order to satisfy the following objectives: firstly, to test its capability to predict the performance of such devices both at design and at off-design conditions, by means of a comparison with experimental results. This is very important since a high prediction capability allows the developed analysis to be used not only for performance evaluation, but also for design purposes. Secondly, to quantify separately the effect of the various elements that have a stabilizing influence on the system when the load is changing. In this way it is possible to single out those parameters that may be varied, when designing the system, in order to improve its stability. In fact, a good stability is required when large changes of the operating conditions are foreseen during the operation. In order to illustrate these features, we have considered, as an example of thermoelectric dynamic energy conversion system, the well known Harwell thermo-mechanical generator, whose testing has been carried out, and the results provided, by Cooke-Yarborough for use by authors.
Analysis of Free-Piston Stirling Engine/Linear Alternator Systems Part 2: Results
BENVENUTO, GIOVANNI BATTISTA;
1995-01-01
Abstract
Abstract: A coupled electric, dynamic, and thermodynamic analysis, developed by the authors for free-piston Stirling engine/linear alternator systems and reported in the first part of this study, is applied here to an existing and operating plant in order to satisfy the following objectives: firstly, to test its capability to predict the performance of such devices both at design and at off-design conditions, by means of a comparison with experimental results. This is very important since a high prediction capability allows the developed analysis to be used not only for performance evaluation, but also for design purposes. Secondly, to quantify separately the effect of the various elements that have a stabilizing influence on the system when the load is changing. In this way it is possible to single out those parameters that may be varied, when designing the system, in order to improve its stability. In fact, a good stability is required when large changes of the operating conditions are foreseen during the operation. In order to illustrate these features, we have considered, as an example of thermoelectric dynamic energy conversion system, the well known Harwell thermo-mechanical generator, whose testing has been carried out, and the results provided, by Cooke-Yarborough for use by authors.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
