The proposed bridge has a simple analog design featuring few components and may be implemented inexpensively at any laboratory. Yet, it is characterized by a low input stray capacitance (1 pF in the prototype with margin for improvement) and a very good accuracy, in terms of measurement uncertainty and repeatability: the method of balancing successive readings of the voltage drops across the ‘‘capacitor under test” and a reference resistor uses at best the external voltmeter in terms of measurement accuracy and avoid the need for a voltage reference and related stability issues.
Scheda prodotto non validato
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo
Titolo: | A low cost capacitive bridge based on voltage drop balance |
Autori: | |
Data di pubblicazione: | 2010 |
Rivista: | |
Abstract: | The proposed bridge has a simple analog design featuring few components and may be implemented inexpensively at any laboratory. Yet, it is characterized by a low input stray capacitance (1 pF in the prototype with margin for improvement) and a very good accuracy, in terms of measurement uncertainty and repeatability: the method of balancing successive readings of the voltage drops across the ‘‘capacitor under test” and a reference resistor uses at best the external voltmeter in terms of measurement accuracy and avoid the need for a voltage reference and related stability issues. |
Handle: | http://hdl.handle.net/11567/230912 |
Appare nelle tipologie: | 01.01 - Articolo su rivista |