The bursting phenomenon consists in the switch of a laminar separation bubble from a short to a long configuration. In the former case, reduced effects on profile pressure distribution are typically observed with respect to the attached condition. On the contrary, long bubbles provoke significant variations in the loading coefficient upstream of the separation position, with increased risk of stall of the lifting surfaces. The present work presents an experimental database describing separated boundary layers evolving under different Reynolds numbers, adverse pressure gradients and free-stream turbulence levels. Overall, more than 80 flow conditions were tested concerning short and long bubbles for the characterization of separated flows under turbine-like conditions. Measurements were performed on a flat plate geometry using a fast-response Particle Image Velocimetry (PIV) system. For each flow case, two sets of 6000 flow records were acquired with an acquisition frequency equal to 300 and 1000 Hz. Based on existing criteria for the identification of the bursting phenomenon, the flow cases were clustered in terms of short and long bubble states. Additionally, the kind of instability (i.e., convective or absolute) developing into the separated boundary layer was identified based on flow statistics. The present data captures the existing link between the bursting of a laminar separation bubble and the onset of the absolute instability of the separated shear layer, with stationary vortices forming in the dead air region.

An Experimental Database for the Analysis of Bursting of a Laminar Separation Bubble

Dellacasagrande M.;Lengani D.;Simoni D.;Ubaldi M.
2024-01-01

Abstract

The bursting phenomenon consists in the switch of a laminar separation bubble from a short to a long configuration. In the former case, reduced effects on profile pressure distribution are typically observed with respect to the attached condition. On the contrary, long bubbles provoke significant variations in the loading coefficient upstream of the separation position, with increased risk of stall of the lifting surfaces. The present work presents an experimental database describing separated boundary layers evolving under different Reynolds numbers, adverse pressure gradients and free-stream turbulence levels. Overall, more than 80 flow conditions were tested concerning short and long bubbles for the characterization of separated flows under turbine-like conditions. Measurements were performed on a flat plate geometry using a fast-response Particle Image Velocimetry (PIV) system. For each flow case, two sets of 6000 flow records were acquired with an acquisition frequency equal to 300 and 1000 Hz. Based on existing criteria for the identification of the bursting phenomenon, the flow cases were clustered in terms of short and long bubble states. Additionally, the kind of instability (i.e., convective or absolute) developing into the separated boundary layer was identified based on flow statistics. The present data captures the existing link between the bursting of a laminar separation bubble and the onset of the absolute instability of the separated shear layer, with stationary vortices forming in the dead air region.
File in questo prodotto:
File Dimensione Formato  
ijtpp-09-00003.pdf

accesso aperto

Tipologia: Documento in versione editoriale
Dimensione 5.19 MB
Formato Adobe PDF
5.19 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/1169935
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact