Conceptual design of a process for hydrogen production from waste biomass and its storage in form of liquid ammonia

In this work we present the simulation of a plant for the exploitation of renewable hydrogen (e.g. from biomass gasification) with production of renewable ammonia as hydrogen vector and energy storage medium. The simulation and sizing of all unit operations were performed with Aspen Plus (R) as software. Vegetable waste biomass is used as raw material for hydrogen production, more specifically pine sawdust.The hydrogen production process is based on a gasification reactor operating at high temperature (700-800 degrees C), in the presence of a gasifying agent such as air or steam. At the outlet, a solid residue (ash) and a certain amount of gas, which mainly contains H2, CH4, CO and some impurities (e.g. sulphur or chlorine compounds) are obtained. Subsequently this gas stream is purified and treated in a series of reactors in order to maximize the hydrogen yield. In fact, after the removal of the sulphur compounds through an absorption column with MEA (to avoid poisoning of the catalytic processes), 3 reactors are arranged in series: Methane Steam Reforming (MSR), High temperature Water-Gas Shift (HT-WGS), Low temperature Water-Gas Shift (LT-WGS).In the first MSR reactor, methane reacts at 1000 degrees C in presence of steam and a nickel -based catalyst, in order to obtain mainly H2, CO and CO2. Subsequently two steps of WGS are present to convert most of the CO into H2 and CO2. Also these reactions are carried out in the presence of a catalyst and with an excess of water.All the oxygenated compounds must be carefully eliminated: the remaining traces of CO are methanated while CO2 is removed by a basic scrubbing with MEA (35 wt%) inside an absorption column. The Haber-Bosch synthesis of ammonia was carried out at 200 bar and in a temperature range between 300 and 400 degrees C, using two catalysts: Fe (wustite) and Ru/C.As overall balance, from an hourly flow rate of 1000 kg of dry biomass and 600 kg of nitrogen, 550 kg of NH3 at 98.8 wt% were obtained, demonstrating the proof of concept of this newly designed process for the production of hydrogen from renewable waste biomass and its transformation into a liquid hydrogen vector to be easily transported and stored. (c) 2023 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY license (http://creativecommons.org/ licenses/by/4.0/).