The Smart Polygeneration Microgrid (SPM) at the Savona Campus of the University of Genoa consists of several renewable and traditional electrical and thermal generating units integrated with electric batteries; buildings and facilities are connected by an electrical grid and a district heating network. Thermal and electrical power flows are managed by a proper Energy Management System (EMS) which includes models for all the SPM components ensuring operational costs minimization in compliance with networks constraints. The present study focuses on the integration of a thermal energy storage (TS) system in the SPM: to this aim, a new thermal storage model based on a stepped two-zone approach has been built inside the dynamic EMS solver. The TS is conceived for recovering additional heat from two 65kWel cogenerative gas turbines (CGT), thus minimizing the operation time of the backup gas heaters (GH): the analysis is aimed at inferring the best TS size in terms of different key parameters, expressed through properly defined economic and energy criteria, including overall energy consumption, reduced greenhouse emissions, minimum payback period. The model is applied to energy demand data (heat and electricity) as measured at 15 min time steps along 2 years. The present dynamic analysis shows that an optimized size TS based on sensible heat can increase the CGT operation hours up to 34% yearly and reduce the equivalent CO2 emissions by 4%.

Simulation and design of a large thermal storage system: Real data analysis of a smart polygeneration micro grid system

Memme S.;Boccalatte A.;Brignone M.;Delfino F.;Fossa M.
2022-01-01

Abstract

The Smart Polygeneration Microgrid (SPM) at the Savona Campus of the University of Genoa consists of several renewable and traditional electrical and thermal generating units integrated with electric batteries; buildings and facilities are connected by an electrical grid and a district heating network. Thermal and electrical power flows are managed by a proper Energy Management System (EMS) which includes models for all the SPM components ensuring operational costs minimization in compliance with networks constraints. The present study focuses on the integration of a thermal energy storage (TS) system in the SPM: to this aim, a new thermal storage model based on a stepped two-zone approach has been built inside the dynamic EMS solver. The TS is conceived for recovering additional heat from two 65kWel cogenerative gas turbines (CGT), thus minimizing the operation time of the backup gas heaters (GH): the analysis is aimed at inferring the best TS size in terms of different key parameters, expressed through properly defined economic and energy criteria, including overall energy consumption, reduced greenhouse emissions, minimum payback period. The model is applied to energy demand data (heat and electricity) as measured at 15 min time steps along 2 years. The present dynamic analysis shows that an optimized size TS based on sensible heat can increase the CGT operation hours up to 34% yearly and reduce the equivalent CO2 emissions by 4%.
File in questo prodotto:
File Dimensione Formato  
2022P-DIE-ATE-Simulation_and_design_of_a_large_thermal_Storage_system_real_Data_analysis_of_a_smart_polygeneration_microgrid_system.pdf

accesso chiuso

Tipologia: Documento in versione editoriale
Dimensione 4.39 MB
Formato Adobe PDF
4.39 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/1082808
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 11
  • ???jsp.display-item.citation.isi??? 9
social impact