The present paper proposes an investigation on the application of Al2O3-water nanofluid within a PV/T panel in order to assess the potential to improve the performance of the device. The analysis has been carried out by developing a numerical model by means of the commercial software Comsol. Two dimensional nanofluids laminar convection flows for Re comprised between 250 and 1000, concentration between 0% and 6%, inlet temperatures of 293.15 K and 323 K and particles dimension of 20 and 40 nm have been simulated in an asymmetric heated channel. Under an imposed external heat flux of 1000 W on the top surface of the channel, the results show that nanofluids guarantee better cooling performances, in fact a decrease in top wall temperature of ∼3 K is observed for an inlet temperature of 293.15 K and a reduction of ∼5 K is observed for an inlet temperature of 323 K. Nusselt number and average heat transfer coefficient for nanofluids also increase in a range between 2% and 15%. On the contrary, a relevant increase of pressure drops is detected. The combined effect of heat transfer enhancement and pressure drop increase has been investigated by implementing an entropy generation analysis, which highlights that reduction of thermal entropy generation is more significant than the increase of frictional entropy generation.

Numerical analysis of the Al2O3-water nanofluid forced laminar convection in an asymmetric heated channel for application in flat plate PV/T collector

Bianco, Vincenzo;Scarpa, Federico;Tagliafico, Luca A.
2018-01-01

Abstract

The present paper proposes an investigation on the application of Al2O3-water nanofluid within a PV/T panel in order to assess the potential to improve the performance of the device. The analysis has been carried out by developing a numerical model by means of the commercial software Comsol. Two dimensional nanofluids laminar convection flows for Re comprised between 250 and 1000, concentration between 0% and 6%, inlet temperatures of 293.15 K and 323 K and particles dimension of 20 and 40 nm have been simulated in an asymmetric heated channel. Under an imposed external heat flux of 1000 W on the top surface of the channel, the results show that nanofluids guarantee better cooling performances, in fact a decrease in top wall temperature of ∼3 K is observed for an inlet temperature of 293.15 K and a reduction of ∼5 K is observed for an inlet temperature of 323 K. Nusselt number and average heat transfer coefficient for nanofluids also increase in a range between 2% and 15%. On the contrary, a relevant increase of pressure drops is detected. The combined effect of heat transfer enhancement and pressure drop increase has been investigated by implementing an entropy generation analysis, which highlights that reduction of thermal entropy generation is more significant than the increase of frictional entropy generation.
File in questo prodotto:
File Dimensione Formato  
Scarpa_Federico_3(Numerical analysis of the Al2O3).pdf

accesso chiuso

Tipologia: Documento in versione editoriale
Dimensione 1.42 MB
Formato Adobe PDF
1.42 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/893808
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 79
  • ???jsp.display-item.citation.isi??? 74
social impact