The use of RANS viscous CFD simulations to evaluate the resistance of ships is well established. These methods, however, often require a high number of calculation cells with consequent substantial hardware requirements. BEM analysis can be performed in a short time and with modest hardware resources, but returned more qualitative results without the viscous part, even if proven and reliable. The objective is to achieve good RANS simulations in a short time so as to make them competitive with panel methods especially in the evaluation phase of different design alternatives. The aim of this work is to study and standardize the operating modes to do viscous simulations with low number of cells, for carrying out more rapidly the calculations, without any necessity of super-computers. The foregoing methods are applied to study high speed trimaran hulls. For the RANS method a system of localized mesh-sizing of the computational grid is evaluated to get a good simulation in the shortest time possible. Results for resistance and trim from RANS 3-DOF simulations are compared with experimental towing tank tests and with BEM analysis also using transverse and longitudinal wave-cuts.

Comparison between Rans Simulations with Low Number of Cells and BEM Analysis for a High Speed Trimaran Hull

AGRUSTA, ANDREA ANTONIO;BRUZZONE, DARIO;
2014-01-01

Abstract

The use of RANS viscous CFD simulations to evaluate the resistance of ships is well established. These methods, however, often require a high number of calculation cells with consequent substantial hardware requirements. BEM analysis can be performed in a short time and with modest hardware resources, but returned more qualitative results without the viscous part, even if proven and reliable. The objective is to achieve good RANS simulations in a short time so as to make them competitive with panel methods especially in the evaluation phase of different design alternatives. The aim of this work is to study and standardize the operating modes to do viscous simulations with low number of cells, for carrying out more rapidly the calculations, without any necessity of super-computers. The foregoing methods are applied to study high speed trimaran hulls. For the RANS method a system of localized mesh-sizing of the computational grid is evaluated to get a good simulation in the shortest time possible. Results for resistance and trim from RANS 3-DOF simulations are compared with experimental towing tank tests and with BEM analysis also using transverse and longitudinal wave-cuts.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/811236
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact