The borohydride oxidation reaction (BOR) was studied at nickel and nickel-cerium (Ni-Ce, with 5 and 10 at% Ce) alloy electrodes in alkaline media. The samples were prepared by arc-melting and their microstructure and phase composition were determined by scanning electron microscopy and electron probe microanalysis based on energy dispersive X-ray spectroscopy.BORwas investigated using cyclic voltammetry and chronoamperometry and kinetic parameters such as charge transfer coefficients, number of electrons exchanged and standard heterogeneous rate constants, were evaluated. The three studied electrodes exhibited similar performance for BOR with Ni95Ce5 alloy electrode giving the highest current densities. Direct borohydride-peroxide fuel cell (DBPFC) was constructed employing Ni95Ce5 alloy electrode as anode and main cell parameters (e.g., maximum cell voltage, peak power density) were determined. Influence of temperature on the BOR on Ni and Ni-Ce alloy electrodes, as well as on the DBPFC performance was explored in the 25–45◦C range. A peak power density of 110 mW cm−2 was obtained at 45◦C for a cell voltage of 0.50 V and current density of 219 mA cm−2.

Nickel and Nickel-Cerium Alloy Anodes for Direct Borohydride Fuel Cells

MACCIO', DANIELE;SACCONE, ADRIANA;
2014-01-01

Abstract

The borohydride oxidation reaction (BOR) was studied at nickel and nickel-cerium (Ni-Ce, with 5 and 10 at% Ce) alloy electrodes in alkaline media. The samples were prepared by arc-melting and their microstructure and phase composition were determined by scanning electron microscopy and electron probe microanalysis based on energy dispersive X-ray spectroscopy.BORwas investigated using cyclic voltammetry and chronoamperometry and kinetic parameters such as charge transfer coefficients, number of electrons exchanged and standard heterogeneous rate constants, were evaluated. The three studied electrodes exhibited similar performance for BOR with Ni95Ce5 alloy electrode giving the highest current densities. Direct borohydride-peroxide fuel cell (DBPFC) was constructed employing Ni95Ce5 alloy electrode as anode and main cell parameters (e.g., maximum cell voltage, peak power density) were determined. Influence of temperature on the BOR on Ni and Ni-Ce alloy electrodes, as well as on the DBPFC performance was explored in the 25–45◦C range. A peak power density of 110 mW cm−2 was obtained at 45◦C for a cell voltage of 0.50 V and current density of 219 mA cm−2.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/692771
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 44
  • ???jsp.display-item.citation.isi??? 40
social impact