The corrosion behaviour of two Mg–Al–Er alloys with increasing content of erbium (Mg95Al3Er2 and Mg95Al2Er3) has been evaluated in borate buffer solution and compared with that of the commercial AM60 alloy (Mg–6.0Al–0.13Mn, at%) employed in the automotive industry. Scanning electron microscopy and quantitative electron probe microanalysis were used to characterize the samples, prior and afterthe electrochemical tests. The experiments were carried out in 0.05 M H3BO3 þ 0.075 M Na2B4O7 solution with pH ¼ 8.4. Anodic polarization curves were recorded, potentiostatic current decay transients were obtained at anodic potentials and the polarization resistance was determined. The alloys show similar microstructures characterized by a Mg-based solid solution, surrounded by a very small amount of a secondary phase. The alloys investigated exhibit enhanced corrosion resistance with respect to AM60 alloy. Electrochemical investigations reveal that the surface layers formed on the erbium-containing alloys provide a better protective effectiveness than the magnesium hydroxide or aluminium hydroxide layer formed on AM60 in borate buffer solution. Based on preliminary analysis, the incorporation of erbium in the Mg(OH)2 lattice is believed to be responsible for the improved corrosion behaviour of the Mg–Al–Er alloys.

Effect of erbium addition on the corrosion behaviour of Mg-Al alloys

DE NEGRI, SERENA;SACCONE, ADRIANA;DELFINO, STEFANO
2005-01-01

Abstract

The corrosion behaviour of two Mg–Al–Er alloys with increasing content of erbium (Mg95Al3Er2 and Mg95Al2Er3) has been evaluated in borate buffer solution and compared with that of the commercial AM60 alloy (Mg–6.0Al–0.13Mn, at%) employed in the automotive industry. Scanning electron microscopy and quantitative electron probe microanalysis were used to characterize the samples, prior and afterthe electrochemical tests. The experiments were carried out in 0.05 M H3BO3 þ 0.075 M Na2B4O7 solution with pH ¼ 8.4. Anodic polarization curves were recorded, potentiostatic current decay transients were obtained at anodic potentials and the polarization resistance was determined. The alloys show similar microstructures characterized by a Mg-based solid solution, surrounded by a very small amount of a secondary phase. The alloys investigated exhibit enhanced corrosion resistance with respect to AM60 alloy. Electrochemical investigations reveal that the surface layers formed on the erbium-containing alloys provide a better protective effectiveness than the magnesium hydroxide or aluminium hydroxide layer formed on AM60 in borate buffer solution. Based on preliminary analysis, the incorporation of erbium in the Mg(OH)2 lattice is believed to be responsible for the improved corrosion behaviour of the Mg–Al–Er alloys.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11567/246373
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 112
  • ???jsp.display-item.citation.isi??? 97
social impact